Enfield, CT Mold Damage Remediation

Your Enfield home or commercial property can quickly become infested with mold if a source of water is present. Mold can spread throughout a property in as little as 48 hours. Since mold can produce allergens and irritants that threaten your health, call SERVPRO of Bloomfield/Enfield to inspect your Enfield home or property if you suspect you have a mold problem. When we find mold we have the training, equipment, and expertise to remediate your mold infestation and restore your home or commercial property--“Like it never even happened.” And we respond quickly. The sooner you solve your mold problem the less damage the mold will do.

SERVPRO of Bloomfield / Enfield

If You See Signs of Mold, Call Us Today – (860) 216-2785

Understanding Mold

Microscopic mold spores exist almost everywhere, outdoors and indoors, making it impossible to remove all mold from a home or business. Some restoration businesses advertise “mold removal” and even guarantee to remove all mold, which is a fallacy. Consider the following mold facts:

  • Mold is present almost everywhere, indoors and outdoors.
  • Mold spores are microscopic and float along in the air, and may enter your home through windows, doors, or AC/heating systems or even hitch a ride indoors on your clothing or on a pet.
  • Mold spores thrive on moisture. Mold spores can quickly grow into colonies when exposed to water. These colonies may produce allergens, irritants, and toxins. 
  • Before mold remediation can begin, any sources of water or moisture must be addressed. Otherwise, the mold may return. 
  • Mold often produces a strong, musty odor and can lead you to possible mold problem areas.
  • Even higher-than-normal indoor humidity can support mold growth. Keep indoor humidity below 45 percent.

Faster to Any Size Fire Disaster

A minor mold problem can quickly become a major infestation if left untreated. We can start the remediation process immediately after you contact us. A faster response lessens the mold damage, limits additional damage, and reduces the remediation cost.

Locally Owned, with National Resources

We live and work in this community too; we might even be neighbors. As a locally owned and operated business, SERVPRO of Bloomfield / Enfield is close by and ready to respond to your mold damage emergency. We are proud to be an active member of the Enfield community and want to pitch in and help make our community the best it can be.

We are proud to serve our local communities:

Highly Trained Water and Mold Restoration Specialists

We are trained mold damage specialists who get started quickly to get your home or business back to normal, with specific training and certifications to handle your restoration needs. Learn about our water and mold training and certificates.

The Mold Remediation Process

Every mold damage scenario is different and requires a unique solution, but the general mold remediation process stays the same. The steps listed below illustrate our “typical” process:

Step 1: Emergency Contact - (860) 216-2785

The mold cleanup and restoration process begins when you call us. Our representative will ask a series of questions to help us determine the necessary equipment, resources, and personnel.

Step 2: Inspection and Mold Damage Assessment

We determine the scope of the mold damage by carefully inspecting your property for visible signs of mold. Since mold can be hidden, we use various technologies to detect mold and hidden water sources. 

Step 3: Mold Containment

To keep the mold spores from spreading further, we will use various mold containment procedures. Our professionals may use physical barriers and negative air pressure to isolate the contaminated area and to help prevent the mold spores from spreading through your Enfield, CT home or business. Also, we’ll turn off the property’s fans and heating and cooling systems to prevent the spread of mold.

Step 4: Air Filtration

We use powerful air scrubbers, HEPA vacuums, and other filtration equipment to remove microscopic mold spores out of the air. This air filtration process and our mold containment process help to prevent the spread of these mold spores while the mold remediation is in process.

Step 5: Removing Mold and Mold-Infested Materials

The mold remediation process depends on the amount of mold growth and the types of surfaces on which the mold appears. We’ll use antifungal and antimicrobial treatments to eliminate mold colonies and to help prevent new colonies from forming. It may be necessary to remove and dispose of mold-infested porous materials, like drywall and carpeting, to remediate heavy mold growth.

Step 6: Cleaning Contents and Sanitizing

We clean your furniture, decorative items, curtains, clothing, and other restorable items affected by mold, using a variety of cleaning techniques to clean and disinfect your belongings. We’re also trained to remove odors and provide deodorization using fogging equipment.

Step 7: Restoration

Depending on the level of mold damage, drywall, subfloors, and other building materials may have been removed. Restoration may involve minor repairs, such as replacing drywall, painting, and installing new carpet; or it may entail major repairs such as the reconstruction of various areas or rooms in a home or business. The restoration step gets your home or business back to normal.

SERVPRO knows Mold

SERVPRO of Bloomfield / Enfield has the expertise to make any mold problem a memory in Enfield, CT. We have seen the distress homeowners experience upon finding mold at their property. SERVPRO can help calm any mold concerns. Our trained professionals have the equipment and knowledge it takes to properly remediate mold. Call (860) 216-2785 - We are ready and waiting to respond to your emergency.